Control of Particulate Emissions from Power Plants Burning Low Sulfur Coal
will be the Hot Topic on July 2nd
Reducing particulate emissions from coal burning power plants has always been a
difficult and complex problem. State and Federal regulations demand highly
efficient removal of fly ash from exhaust gases. The primary method used by the
electric utility industry for collecting fly ash is electrostatic precipitators
(ESP). Existing precipitators were designed to provide a particular efficiency
of collection for the coals being used or intended to be used at the time the
ESP was designed.
As utilities have switched to low sulfur coal to meet environmental regulations
for SO2 emissions, the particulate control problem has only become more
difficult. The selection of the proper technology to control particulate
emissions from power plants burning low sulfur coal is likely to get even more
difficult in the near future. With the vacature of CAMR and CAIR, it is very
probable that by next year all plants will face a MACT requiring a 90 percent
reduction in mercury, SO3 and other air toxics. It is also probable that fine
particulates will be a surrogate for air toxics. Baghouses will most likely be
required at many power plants in addition to an ESP and the requirements for
those plants already equipped with fabric filters will change. Are there other
technologies available that will meet requirements of the expected MACT
regulations especially for the smaller power plants where a baghouse may not be
economical?
The following speakers will discuss the future demands on, available
technologies for and current experience with particulate control for low sulfur
coal applications.
Greg Carleton, President of Pollution Control Services, Inc., PCS, was started
in 1998 to provide experienced on-site consultant services for Wet FGD, WESP,
ESP, Baghouses, SCR and Dry Injection Systems. Greg's presentation will focus on
assuring that the basic operating parameters of the existing ESP/Baghouse
original design requirements are understood; completely reviewing the numerous
boiler and fuel changes that have been made; and assuring that those numerous
process changes that have been incorporated into the current operating plan are
assessed in meeting future regulatory requirements. If all the basic engineering
design criteria are fully developed and understood, considerable added operating
costs and capital savings are readily achievable.
Mike Widico, Vice President of Business Development for Clyde Bergemann EEC (CBEEC),
will present CBEEC's view of options for particulate control for low sulfur
coals. Mr. Widico has more than 25 years of experience in the APC industry, and
CBEEC has more than 60 years of experience controlling particulate emissions
using Electrostatic Precipitators and Fabric Filters. Mike will discuss CBEEC's
approach to the evolving market for low sulfur applications.
Chet Moon, Ph.D. Technical Sales/Engineer/Applications Manager at Toray
Fluorofibers (America), Inc. Chet will describe Toray's broad portfolio of
fibers for filtration applications. These fibers offer excellent chemical and
thermal resistance. Currently, Toray PPS TORCONŽ is the most suitable fiber to
meet most of the filtration needs of coal-fired boilers. Toray is actively
seeking new developments to improve filtration performance.
Annie Minga, Kuttner LLC.
John Darrow, Associate, W.L. Gore & Associates, Inc.
P. E. (Mick) Chambers, Southern Environmental, Inc.
Tom Anderson, VP Pleated Products, TDC Filter Manufacturing, Inc., A Midwesco
Filter Resources Company
This webinar will be conducted in two sessions on July 2, 2009. The first
session will begin at 10:00 a.m. We will break for lunch, and the second session
will begin at 12:30 p.m.
To register for the "Hot Topic Hour" on Thursday, July 2 at 10:00 a.m. and 12:30
p.m. CDT, click on: http://www.mcilvainecompany.com/brochures/FGDnetoppbroch/Default1.htm
.
Bob McIlvaine
847 784-0012 ext. 112
rmcilvaine@mcilvainecompany.com