Internal Data Search by Text Descriptor
B&W has sold 1,100 roll wheel pulverizers
B&W has designed, manufactured and placed in operation more than 1,100 roll wheel pulverizers, grinding a wide range of coals at power stations throughout the world. The B&W Roll Wheel® pulverizer has set the standard for high availability, reliable operation and low maintenance. These benefits contribute to stable steam generator performance regardless of station duty.
Revision Date: 12/2/2015
Tags: 221118 - Other Electric Power , Babcock & Wilcox, Pulverizer
Pall filters reduce oil contamination in coal pulverizers
Power generation industry studies have shown that coal pulverizers are an area where improved equipment reliability is badly needed. The Electric Research Institute (EPRI) has determined that 1% of plant availability is lost on average due to pulverizerrelated problems. EPRI also identified oil contamination and excessive leakage as two areas where pulverizer drive train failures account for 53% of pulverizer problems. Pall has installed lube filters which reduce oil contamination and improve plant operation.
Revision Date: 12/2/2015
Tags: 221118 - Other Electric Power , Pall Corporation, Cartridge Filter, Pulverizer
Flowserve Offers Full Range of Control Valves for Power Plant Applications
Flowserve offers a full range of control valves for conventional, as well as combined cycle, power plants.
Revision Date: 4/22/2015
Tags: 221112 - Fossil Fuel 化石燃料, 221112 - Fossil Fuel 化石燃料, Flowserve, Valve, Flow Control
Our water treatment experts can create a tailor-made ultrapure water system for clients using industry-proven continuous electrodeionization (CEDI) water treatment technologies. These solutions, which meet stringent industry standards, are capable of providing reliable, chemical-free operation. They also deliver users a continuous supply of high-quality water with a resistivity of up to 16 Mohm/cm, that is, <0.1 µS/cm.
Revision Date: 8/20/2014
Tags: Geothermal 地热的, RWL Water, Demineralizer, Electrodialysis, Ion Exchange, Electrodeionization, Ultrapure Water, Degasification, Demineralization
MHI supplies ring section boiler feedwater pumps for combined cycle operation
MHI supplies a variety of pumps for combined cycle and coal fired power plants. Several boiler feedwater designs are available depending on pressures and other parameters. The ring section type is used in combined cycle.
Revision Date: 8/19/2014
Tags: 221112 - Fossil Fuel 化石燃料, Mitsubishi Heavy Industries, Boiler Feedwater Pump, Flow Control, Boiler Feedwater Treatment, China
DFT Has Range of Valves for CCGT- Jeff Kane
This chart shows the valve products offered by DFT and their applications.
Revision Date: 6/2/2014
Tags: 221112 - Fossil Fuel 化石燃料, DFT, Valve, High Performance Valve, Flow Control
Advanced Filtration Company Profile in the Combined Cycle Journal, October 1, 2013
Advanced Filtration Concepts (AFC) offers new and innovative filtration products for the GT/ CC power industry. Invest to save with inlet air filters that are high efficiency, low back-pressure and long lasting. As the largest stocking distributor of industrial air filters in the Western United States, AFC is here to meet your most urgent GT inlet filtration needs.
Revision Date: 10/22/2013
Tags: 221112 - Fossil Fuel 化石燃料, Advanced Filtration Concepts, Air Filter, Air Filtration, Air Intake, Combined Cycle Journal
Hach Water Analysis Tools and Parameters for the Power Industry
Product brochure from Danaher Hach on water analysis products for power industry applications including influent water treatment, condensate, boiler feed water, cooling water and wastewater. A diagram and table show the parameters to control/monitor and company products.
Revision Date: 11/16/2011
Tags: 221118 - Other Electric Power , Hach, Xylem, Water Monitor, Analyzer, Boiler Feedwater, Water Monitoring
Preferred Instruments Boiler Feed Water Control System
Boiler feedwater control systems are often the most archaic controls in the steam plant. Poor boiler waterside control contributes to scaling, corrosion, and eventually hot spots and tube failures. The Preferred Feedwater Center can control the surge tank, Deaerator (DA) tank, transfer pumps, and feedwater pumps (on-off or VSD) to improve water quality and feedwater system reliability.
Revision Date: 11/14/2011
Tags: 221118 - Other Electric Power , Xylem, Preferred Instruments, Control System, Boiler Feedwater
Xylem Supplies Heat Exchangers for District Heating
For energy efficiency, groups of commercial and residential buildings often share heating and cooling services from a centralized generating location via district heating and cooling systems. For all district heating and cooling services, heat transfer products are integral to system efficiency and performance. Xylem designs and manufactures a wide range of heat transfer products for commercial district heating and cooling systems. From simple shell and tube heat exchangers to sophisticated, precision-engineered custom units, we can meet all of your heat transfer requirements. Xylem heat transfer products for the district heating and cooling market include: Shell and tube products including standard and custom models, aftercoolers and steam condensers; Plate-type products including gasketed and brazed models; Packaged steam condensers; Air-cooled products.
Revision Date: 11/9/2011
Tags: 221118 - Other Electric Power , 221112 - Fossil Fuel 化石燃料, Xylem, Well Pump, Steam Condenser, Heat Exchanger, District Heating and Cooling
Xylem Supplies Heat Exchangers for Many Industrial Applications
Xylem designs and manufactures heat exchange products for the chemical, pulp and paper, biofuels, sugar processing, petroleum, power generation, mining and general industrial markets. From simple shell and tube heat exchangers, to sophisticated, precision-engineered custom heat exchangers, steam condensers and air-cooled exchangers, they have the products and services to meet heat transfer requirements. Xylem heat transfer products for the industrial heat transfer market include: Shell and tube products including standard and custom models, aftercoolers and steam condensers; Plate-type products including gasketed and brazed models; Packaged steam condensers; Air-cooled products.
Revision Date: 11/9/2011
Tags: 221112 - Fossil Fuel 化石燃料, 212000 - Mining & Quarrying , 322110 - Pulp Mills , 311311 - Sugarcane Mills , 325110 - Petrochemical Manufacturing 石化产品生产, 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, 324110 - Petroleum Refineries 石油精炼, Xylem, Heat Exchanger, Steam Condenser, Biofuel
Hach-Lange TOC Measurement of High-purity Boiler Feed Water in Power Plants
Hach-Lange states in its brochure that the astroTOC UV turbo is the only analyzer on the market capable of measuring total organic carbon (in form of NPOC) in the μg/l level with 100 percent reliability.
Revision Date: 11/7/2011
Tags: 221118 - Other Electric Power , Hach, Xylem, TOC Analyzer, Analyzer, Boiler Feedwater, Water Monitoring
HDPE Geothermal Pressure Pipe from Blue Diamond Industries
Blue Diamond Industries, LLC, headquartered in Lexington, KY, is a privately owned company organized by its shareholders in 2004. The company produces high density polyethylene (HDPE) pipe in Middlesboro, KY, near the Tennessee border. Geothermal exchange is a clean energy method of heating and cooling commercial and residential buildings. The technology is proven and has been in use for decades. In simplest terms, HDPE (High Density Polyethylene) pipe is buried in the ground, allowing heat transfer between the fluid in the pipe and the earth. The fluid in the piping is warmed in the winter and cooled in the summer. The system consists of buried HDPE pipe, a heat pump, and air distribution system. The buried piping heat exchanger is a key component of the geothermal system. Blue Diamond Geothermal Pressure Pipe is manufactured from PE 3408/3608 resin listed in PPI(Plastics Pipe Institute) Standard TR 4 and meets the requirements of IGSHPA (the International Ground Source Heat Pump Association). Blue Diamond is also certified to produce PE 4710 piping, which has a higher Hydrostatic Design Stress and higher environmental stress crack rating. Pipe manufactured from PE 4710 resin will have a higher pressure rating for the same SDR wall thickness compared to 3408/3608 resin. Contact the BDI technical staff for further information. BDI PE 4710 is listed in PPI Standard TR 4. IGSHPA recommends HDPE pipe for its superior properties.
Revision Date: 8/31/2011
Tags: 221116 - Geothermal Power , Blue Diamond Industries, HDPE Resin, Piping, Water Transport
PolyPipe® offers a complete range of extra high molecular weight (EHMW), high-density polyethylene (HDPE) pipe. PolyPipe® is one of the largest manufacturers of pressurerated polyethylene pipe. PolyPipe® uses only select resins that meet demanding standards of excellence and quality. PolyPipe® is strategically positioned. With extrusion facilities and a national network of key distributors covering all regions of the United States, Mexico and Canada. PolyPipe® has six plant locations throughout North America for the best possible geographic location. PolyPipe® is an active member of the Plastics Pipe Institute (PPI). They also sit or chair many associations and standard committee groups.
Revision Date: 8/31/2011
Tags: 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, 212000 - Mining & Quarrying , 221113 - Nuclear Electric Power Generation * , 211112 - Natural Gas Liquid Extraction , 221118 - Other Electric Power , 325412 - Pharmaceutical Preparation Manufacturing , 221310 - Water Supply & Irrigation Systems , PolyPipe, HDPE Resin, Piping, Water Transport
ChromElso from Industeel for Pressure Equipment in High Temperature Hydrogen Service
CromElso is specially designed for the construction of pressure equipment such as hydrotreating reactors and exchangers operating in hydrogen service at high temperatures. It is manufactured in an electric arc furnace using a process that includes desulfurization, dephosphorization, ladle refining and vacuum degassing to provide a reproducible, clean and homogeneous steel. The use of special steelmaking techniques with extra-low phosphorus levels gives CromElso® improved resistance to temper embrittlement as well as excellent low temperature impact toughness properties. CromElso® is available in plate up to very high thickness and can also be provided in half-shells and mono- or multi-piece heads. Alloyed martensitic 9% Cr grades (CromElso® 91 & CromElso® 92) offer high temperature creep resistance and are available for the construction of high pressure high temperature pipes, as well as for pressure vessels for power generation (thermal, nuclear...).
Revision Date: 5/24/2011
Tags: 221112 - Fossil Fuel 化石燃料, 221113 - Nuclear Electric Power Generation * , Industeel, Pressure Vessel, Heat Exchanger, Reactor, Half Shell, Multi-piece Head, Plate, Pipe, Embrittlement, Toughness, Creep Resistance, High Temperature, Hydrotreating
Nuclear Power Applications from Industeel
Nuclear reactors, nuclear waste transport and storage casks all require high-purity nuclear-grade steels, often in great thicknesses. And for the steam turbines used to generate electricity from nuclear power, you need steels that retain their properties at high temperatures and over long periods of time. In addition to steels for steam boilers and tubes, Industeel has extensive experience in nuclear-grade products and offers a wide range of sizes suited to nuclear power stations, primary looks as well as for both steel plate and formed parts that offer sufficient reliability to replace forged solutions. Our factories have been approved by all major nuclear certification organizations (ASME III, RCCM) and we produce all the steel grades required for nuclear applications. In addition, we have the necessary know-how to develop new and better steel solutions for both existing and future nuclear technologies.
Revision Date: 5/16/2011
Tags: 221113 - Nuclear Electric Power Generation * , Industeel, Storage Cask, Alloy Steel, Waste Storage, Waste Transport
Hydroelectric Power Plant Steels Supplied by Industeel
Hydroelectric power plants require steel with exceptional mechanical properties including weldability and reliability in forming. Industeel offers high-strength steel solutions with enhanced weldability in a wide range of formats for applications ranging from penstocks to heavy-duty plates used to build massive structural parts, lean duplex or weldable martensitic (13 4 Mo or PH grades ) combining strength and useful resistance to corrosion , cavitation and wear.
Revision Date: 5/16/2011
Tags: 221111 - Hydroelectric Power Generation 水力发电, Industeel, Alloy Steel, Plate, Turbine Generator
Industeel Soleil C5 is Ideal for Shafts and Impellors for Hydropower Turbines
Soleil C5 grade is specially designed for applications requiring high strength, high toughness and medium corrosion resistance properties. The chromium, nickel and molybdenum additions make the alloy resistant to corrosion in fresh water. Typical applications are hydroelectric turbines and systems (blades, runners, gates, rings, shield plates,…), hydropter wings to fight cavitation by high speed water.
Revision Date: 5/16/2011
Tags: 221111 - Hydroelectric Power Generation 水力发电, Industeel, Impellor, Shaft, Alloy Steel, Lube System
Flexible Seal Plates for Gas Turbine Expanstion Joint
This paper summarizes GE's patent application for flexible seal plates for gas turbine expansion joints. The invention claims to eliminate cracked frames and burned belts in the flat belt design. It is said to be easier to install and will not degrade as does the D design.
Revision Date: 11/29/2010
Tags: 221112 - Fossil Fuel 化石燃料, GE, Exhaust Ductwork, Expansion Joint, Exhaust Handling