Internal Data Search by Event Calendar

Event Date:
Event Name:

How to get the most out of your Baghouse with Gore ePTFE Filter Media by John Darrow, W. L. Gore - Hot Topic Hour October 28, 2010

John Darrow, Energy Market Specialist at W.L. Gore & Associates, Inc., described the characteristics of ePTFE membrane filter media and compared them to other media available. He said that 35 EGUs were now using this material. However, because of higher material cost, it was not necessarily the best solution for every power plant. He described a four-step process to go through to determine what the best media would be for a specific power plant to achieve the objective – “Getting the Lowest Annualized Cost w/o Emissions Problems.”

Revision Date:  10/28/2010

Tags:  221112 - Fossil Fuel 化石燃料, W. L. Gore, Membrane


Filter Selection by Tom Anderson, Midwesco - Hot Topic Hour October 28, 2010

Tom Anderson of Midwesco Filter Resources TDC Filter emphasized that a user should select the filter media that gives the lowest lifetime cost and meets the efficiency requirements. He also provided many recommended installation and operational dos and don’ts for achieving optimum baghouse operation.

Revision Date:  10/28/2010

Tags:  221112 - Fossil Fuel 化石燃料, Midwesco, Cartridge, Operation


Toray High Performance Fibers for Low Sulfur Coal Application by Chet Moon, Toray Fluorofibers - Hot Topic Hour October 28, 2010

Chet Moon, Technical and Applications Manager at Toray Fluorofibers (America), Inc., presented performance data for the range of fibers Toray offers for filtration applications. He said that currently Toray PPS TORCON® is the most suitable fiber to meet most of the filtration needs of coal-fired boilers. However, in the future it may be necessary to utilize one of the more expensive Tefaire® and Teflon® products to meet the regulated limits.

Revision Date:  10/28/2010

Tags:  221112 - Fossil Fuel 化石燃料, Toray Fluorofibers, PTFE, Fiber, PPS


Low Particulate Emissions - Short and Long Term by Charles Barranger, EPSCO - Hot Topic Hour October 28, 2010

Charles Barranger, Senior Consultant at EPSCO International, Inc., discussed the styles of baghouses in use, QA/QC procedures and criteria for selecting filter media. When asked how cost figures into the selection criteria, he stated that life cycle cost is very important but it needs to be balanced against the required efficiency. He also offered techniques for improving the performance of filters to achieve lower particulate emissions.

Revision Date:  10/28/2010

Tags:  221112 - Fossil Fuel 化石燃料, EPSCO, Gas Distribution, Maintenance


The Impact of PM2.5 Legislation on Filter Bag Performance Alternatives by John McKenna, ETS - Hot Topic Hour October 28, 2010

Dr. John D. McKenna, Ph.D., principal and founder of ETS, Inc., reviewed the regulations for PM2.5 and the filter media options for complying with the coming emission limits. He also discussed the standard test methods available for evaluating the performance of various filter materials including EPA’s ETV Generic Verification Protocol for Baghouse Filtration Products, ASTM D 6830, and the proposed ISO method that he said should be issued next March after ten years of work. He reviewed the elements of a bag quality control program and emphasized that a good QA/QC program will be essential to obtaining compliance and efficient baghouse operation.

Revision Date:  10/28/2010

Tags:  221112 - Fossil Fuel 化石燃料, ETS, Legislation, Fine Particulate