Internal Data Search by Application
The following Titles Reflect the Requested Application Sequencing
AMOT valves, conrols, and heat recovery
AMOT 8824 Fallbrook Dr Houston, TX 77064 Phone: (832) 291-5903 Fax: (713) 559-9419 http://www.amot.com Key Personnel: Brant Stewart, Sales Manager Description: AMOT works with original equipment manufacturers and oil and gas companies to design and develop safety products and solutions for engines, compressors, turbines, and other rotating equipment. Our product families include valves, electric and pneumatic instrumentation and control/condition monitoring systems. Sells: Control/Annunciator Systems Heat Recovery Systems Instruments and controls, including meters, gauges, relays, contactors, or switches
Revision Date: 8/3/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, AMOT, Catalyst, Valve, Reciprocating Engine, Silencer, Regulation, Emissions Control, Heat Recovery, Cooling
Fuel Tech has large SNCR systems in China
Fuel Tech has units in Asia which are large e.g 4 x 680 MW and are achieving up to 78% NOx removal with a combination of SNCR and combustion modifications. These additional power points supplement the information provided by Dale Pfaf in sessions 1 & 2. AES Greenridge is 115 MW T -Fired and achieves 60% NOx reduction with combustion modifications, SNCR and ASCR
Revision Date: 8/1/2016
Tags: 221112 - Fossil Fuel 化石燃料, Fuel Tech, NOx, SNCR, Emissions Control, NOx Emissions Reduction, China
MECA recommends SCR for 4 stroke engines and others to OTC in 2011
Substantial NOx reductions and minimization of CO and organics can be achieved with SCR on compressor engines and this is most clear for 4 stroke engines but a good case can also be made for 2 stroke engines. MECA believes that the OTC is missing a significant opportunity to achieve further NOx reductions. SCR has long been the technology of choice for NOx emission reduction in industrial processes and stationary power generation applications. The commercial use of SCR systems for the control of NOx from lean-burn stationary engines has been around since the mid-1980s in Europe and since the early 1990s in the U.S. Since 1995, one MECA member company specifically has installed over 400 SCR systems worldwide for stationary engines with varying fuel combinations including dozens of natural gas powered compressor engines at sites in the U.S. These four-stroke, lean-burn, gas compressor engines, equipped with urea-SCR achieve in excess of 90% reduction in NOx with as little as 2-3 ppm ammonia emissions. Similar units have been deployed in power generation applications. MECA believes that the OTC is also missing a significant opportunity to reduce CO and VOC emissions from lean burn natural gas engines by not setting standards that would require inexpensive, passive, oxidation catalyst controls that are in use today. Oxidation catalysts have been applied to over 250,000 off-road diesel mobile source applications and hundreds of stationary lean burn SI engines. Over 50,000,000 diesel passenger cars and millions of trucks and buses have been equipped with oxidation catalysts. Oxidation catalysts are extremely effective in achieving greater than 90% reduction of hazardous air pollutants such as THC and CO from lean burn engines. These catalysts also provide significant reductions in toxic emissions by eliminating benzene, formaldehyde, acetaldehyde, methanol and other VOCs from the exhaust. Oxidation catalysts have been installed on a limited number of marine diesel applications, a duty cycle that closely mimics stationary operation. Even a relatively inexpensive oxidation catalyst can provide significant multi-pollutant co-benefits in reducing CO, HC, VOC, and SOF emissions. The OTC should consider setting CO and VOC standards that would require emissions controls on all stationary natural gas combustion engines to prevent inadvertent emissions from those engines that are susceptible to such trade-off characteristics when combustion controls are retrofitted to achieve Nox reductions.
Revision Date: 8/1/2016
Tags: 221112 - Fossil Fuel 化石燃料, 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, 483111 - Deep Sea Freight Transportation , Catalyst, Silencer, Heat Recovery Systems, Reciprocating Engine, Valves, Regulation, Cooling, Heat Recovery, Emissions Control
U.S. Interstate Natural Gas Pipeline had 1200 Comperssors in 2006 with 17 Million HP
The U.S. interstate natural gas pipeline network relies on more than 1,200 natural gas compressor stations to maintain the continuous flow of natural gas between supply area and consumers (Figure 1). Compressor stations are “pumping” facilities that advance the flow of natural gas. They are usually situated between 50 and 100 miles apart along the length of a natural gas pipeline system and are designed to operate on a nonstop basis. The average station is capable of moving about 700 million cubic feet (MMcf) of natural gas per day, while the largest can move as much as 4.6 billion cubic feet (Bcf) per day. Between 1996 and 2006, the number of natural gas pipeline compressor stations attached to the interstate mainline natural gas pipeline grid increased significantly. In 1996 there were approximately 1,047 mainline compressor stations, with installed horsepower of about 13.4 million and a combined throughput capability of approximately 743 billion cubic feet per day.1 By 2006, these figures had grown to 1,201 mainline compressor stations, 16.9 million installed horsepower, and a throughput capability of 881 Bcf per day (Table 1). This expansion represented a 26-percent increase in installed horsepower and a 19-percent increase in throughput capacity during the period. Texas Eastman, El Paso. Transcontinental and Tenessee Gas each had more than 1 million HP of compressors. The article has maps of locations and number of compressors for the ten largest pipelines
Revision Date: 8/1/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Silencer, Valves, Heat Recovery Systems, Reciprocating Engine, Catalyst, Regulation, Cooling, Emissions Control, Heat Recovery
Compressor Stations Placed Every 40-70 miles
Compressor stations are facilities located along a natural gas pipeline which compress the gas to a specified pressure, thereby allowing it to continue traveling along the pipeline to the intended recipient. Frequency of Compressor Stations – The total number of compressor station facilities required to move product varies depending on the region and conditions. Generally compressor stations are located about every 40-70 miles along the pipeline. Operating Pressure of the Pipeline – There is a wide variation in the pressure within a given section of pipeline compared to other pipelines in other areas. The typical pressure may range anywhere from 200 psi (pounds per square inch) to 1,500 psi. This wide variation is also due to the type of area in which the pipeline is operating, its elevation, and the diameter of the pipeline. Because of the change in the environment, compressor stations may compress natural gas at different levels. Supply and demand can also be a factor at times in the level of compression required for the flow of the natural gas. Compressor Unit – The compressor unit is the piece of equipment which actually compresses the gas. Some compressor stations may have multiple compressor units depending on the needs of the pipeline. The compressor unit is a large engine which typically works in one of three ways: Turbines with Centrifugal Compressors – This type of compressor is powered by a turbine to turn a centrifugal compressor and is powered by natural gas from the pipeline itself. Electric Motors with Centrifugal Compressors – This type of compressor also utilizes centrifugal compressors to compress the gas; however, instead of being powered by a natural gas fueled turbine, they instead rely on high voltage electric motors. Reciprocating Engine with Reciprocating Compressor – This type of compressor uses large piston engines to crank reciprocating pistons located within cylindrical cases on the side of the unit. These reciprocating pistons compress the gas. These engines are also fueled by natural gas.
Revision Date: 8/1/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Silencer, Valves, Heat Recovery Systems, Reciprocating Engine, Catalyst, Regulation, Cooling, Emissions Control, Heat Recovery
Cloud Computing will Lead to Fewer but Larger Data Centers and Engines
Cloud computing has yet to make its full impact, and the extent and the form of that impact on enterprise and commercial datacenters is still unclear. It will take several years to play out, but demand for on-premises capacity will certainly be offset by the ability to far more easily migrate workloads and place new workloads with cloud providers such as Amazon. This possibility is, in turn, beginning to create new competitive and efficiency pressures; operators looking do ‘more of the same’ or ‘more for less’ are now considering radical change. there will likely be fewer yet larger enterprise datacenters in 2016 and beyond, as many smaller and regional facilities are consolidated into centralized ‘premium’ sites.
Revision Date: 8/1/2016
Tags: 221112 - Fossil Fuel 化石燃料, 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, 483111 - Deep Sea Freight Transportation , Catalyst, Silencer, Valves, Heat Recovery Systems, Reciprocating Engine, Regulation, Emissions Control, Heat Recovery, Cooling
Siemens Dresser Rand Sells Gas Engines and Turbnes
Dresser-Rand, A Siemens Business 299 Lincoln Street Suite 301 Worcester, MA 1605 Phone: (508) 595-1727 http://www.dresser-rand.com Key Personnel: Christopher Nagle, General Manager- Engines North America Ilker Budak, Business Development Manager Description: Manufacturer specializing in high-efficiency, low-emission gas engines which operate on a wide variety of fuels. Dresser-Rand Guascor engines are designed for various applications such as power generation, cogeneration and mechanical drive. Sells: Engines, Diesel or Gas Engines, Gas Turbine Generator Sets Motor Generator Sets Trailers, Generator Set Services: Engines, Diesel or Gas
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Siemens Dresser Rand, Catalyst, Silencer, Heat Recovery Systems, Reciprocating Engine, Regulation, Emissions Control, Heat Recovery, Cooling
Cummins Supplies Engines and Emission Control Systems- EGSA member
Cummins Power Generation 3850 N Victoria Street Minneapolis, MN 55126 Phone: (651) 787-6267 http://www.cumminspower.com Branches in: Please, search for Cummins Power Generation locations at http://www.cumminspower.com/en/locator/ Key Personnel: Kirk Adams, Director North America Power Systems Sales Debra Laurents, Global Processes Manager Jeff Vanpoucke, Director North America Power Products Sales Luiz Rubino, Global Applications Director Description: Cummins Power Generation is a world leader in the design and manufacture of diesel and lean burn gas generator sets, transfer switches, paralleling equipment and controls for use in standby,prime and continuous rating aplications. Sells: Batteries/Battery Chargers Enclosures, Generator Set Engines, Diesel or Gas Engines, Gas Turbine Filters, Lube Oil, Fuel or Air Fuel Tanks and Fuel Storage Systems Generator Sets Generators/Alternators Heat Recovery Systems Silencers/Exhaust Systems/Noise Abatement Rents: Enclosures, Generator Set Generator Sets Trailers, Generator Set Services: Batteries/Battery Chargers Control/Annunciator Systems Enclosures, Generator Set Engine Starters/Starting Aids Engines, Diesel or Gas Engines, Gas Turbine Filters, Lube Oil, Fuel or Air Fuel Tanks and Fuel Storage Systems Generators/Alternators Heat Recovery Systems
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Cummins, Reciprocating Engine, Valves, Catalyst, Silencer, Regulation, Heat Recovery, Cooling, Emissions Control
Caterpillar Supplies, Rents, and Services Engines, Filters and Emission Control Systems
Caterpillar, Inc. AC 6109 P.O. Box 610 Mossville, IL Phone: (800) 447-4986 Fax: (309) 578-7302 http://www.cat.com/powergeneration Description: Generator sets, engines, enclosures with and without sound attenuation, uninterruptible power system (UPS), batteries, control panels, filters, radiators, switchgear, voltage regulators, mobile rental gen sets. Generator set systems are sold by Caterpillar dealers into Distributed/Dispersed generation, load management, peak shaving, emergency standby, critical power and cogeneration applications. Sells: Batteries/Battery Chargers Engines, Diesel or Gas Engines, Gas Turbine Filters, Lube Oil, Fuel or Air Fuel Cells Generator Sets Generators/Alternators Switchgear and Transfer Switches (Automatic or Manual), Bypass Isolation Switches, and/or Switchgear Panels Uninterruptible Power Supplies Rents: Engines, Diesel or Gas Engines, Gas Turbine Generator Sets Load Banks Switchgear and Transfer Switches (Automatic or Manual), Bypass Isolation Switches, and/or Switchgear Panels Uninterruptible Power Supplies Services: Engines, Diesel or Gas Fuel Cells Generator Sets Generators/Alternators Switchgear and Transfer Switches (Automatic or Manual), Bypass Isolation Switches, and/or Switchgear Panels Uninterruptible Power Supplies Michael Sanford of Cummins was a speaker at the EGSA spring 2016 conference talking about gen set emissions
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Caterpillar, Reciprocating Engine, Catalyst, Silencer, Valves, Regulation, Emissions Control, Heat Recovery, Cooling
Boulden Supplies Miratech SCR Systems Maxim Silencers , American Industrial Heat Exchangers
Boulden Company 1013 Conshohocken Road Conshohocken, PA 19428 Phone: (610) 825-1515 Fax: (610) 825-5544 http://www.bouldencompany.com Key Personnel: Andy Boulden, Sales Phil Boulden, Sales Joyce Legge, Sales Colleen Whalon, Sales Description: Athlon Generators, Miratech Corp Oxidation, 3-way, SCR Catalyst, DPFs, Silencers; Covrad/GTi/API Radiators; Maxim Silencers; Insultech Insulation Blankets, SENS battery chargers, Nicad batteries, Simplex Loadbanks & Fuel Systems,Sutton Stromart Radiators; Hythane Bi/Dual Fuel; American Industrial Shell & Tube Heat Exchangers; Xylem Inc; VMC Group; Exhaust Flex, Braided Hose, Expansion Joints, Expansion Tanks. Sells: Batteries/Battery Chargers Control/Annunciator Systems Emission Control Equipment Fuel Tanks and Fuel Storage Systems Generators/Alternators Heat Recovery Systems Load Banks Radiator/Heat Exchangers Silencers/Exhaust Systems/Noise Abatement Vibration Isolators
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Boulden Company, Valves, Catalyst, Heat Recovery Systems, Reciprocating Engine, Regulation, Cooling, Heat Recovery, Emissions Control
Baker Haight Pumps for Lubrication, Fuel, and Filtraton
Baker Manufacturing 133 Enterprise St Evansville, WI 53536 Phone: (800) 871-8250 Fax: (608) 882-3777 http://www.haightpump.com Key Personnel: Tom Skaleski, Director of Sales - Haight Pump Description: Haight Pump manufactures cast iron pumps ranging in flow from 1 gpm to 240 gpm. We specialize in manufacturing custom products to meet unique customer application requirements and have the ability to engineer, cast, machine, assemble and test all at one location. Sells: Fuel Tanks and Fuel Storage Systems
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Baker Mfg. Co./ Haight Pumps, Pump, Catalyst, Silencer, Reciprocating Engine, Valves, Regulation, Cooling, Emissions Control, Heat Recovery
Aristo Catalyst Systems for Stationary, Locomotive and Marine
Aristo® Intelligent Catalyst Technology® 4410 W. 37th Avenue Bldg. F Hobart, IN 46342 Phone: (219) 963-2288 Fax: (219) 963-7334 http://www.aristoglobal.com Key Personnel: Douglas Kowalski, Operations Director Bobby Charalambos, Sales & Customer Service Coordinator Description: Since 1990, Aristo® Intelligent Catalyst Technology® has developed a reputation for providing high quality & exceptional value in the design & manufacture of technologically advanced catalysts & catalyst systems for the global emissions market. With performance proven expertise that crosses a wide range of catalyst markets, Aristo offers INTELLIGENT CATALYST products for diesel, gasoline, off-highway, stationary, recreational, locomotive & marine applications & large industrial power installations. Sells: Emission Control Equipment
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Aristo Intelligent Catalyst Technology, Valves, Silencer, Reciprocating Engine, Catalyst, Heat Recovery Systems, Regulation, Emissions Control, Cooling, Heat Recovery
Crankcase Ventilation and Exhaust Gas Recirculation Require Rugged Filters
Exhaust Gas Recirculation. Exhaust gas recirculation (EGR), the process of recirculating some of the exhaust gas back into the intake system, is an important technology that has allowed modern diesel engines to achieve very low engine out NOx emissions. As can be imagined, introducing relatively high temperature exhaust gas into the intake air can have significant impacts on the temperature and composition of the combustion air supplied to the combustion chamber. In order to ensure proper functioning of an engine with EGR, various hardware components, such as valves and coolers have to be introduced to control the flow, temperature and distribution of EGR supply and the resulting mixture with intake air. As well,turbocharger sizing and technology choices can also be affected and steps must be taken to ensure sufficient oxygen is still available for combustion and sufficient EGR flow is available at all engine operating condition ***Crankcase Ventilation. Engines with closed crankcase ventilation systems vent gases from the crankcase into the intake air system to be recirculated into the engine. This recirculated blowby must be properly managed. Also, while the recirculated gases are filtered, a small amount of oil and particulate can still be introduced into the intake system and accumulate on critical air management components such as the compressor. Over time, if a sufficient accumulation of this material occurs, it can have a significant impact on the air management system performance.
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Filter, Reciprocating Engine, Silencer, Catalyst, Heat Recovery Systems, Regulation, Air Filtration, Emissions Control, Cooling, Heat Recovery
Hilco Supplies Filters and Mist Eliminators for Engines –EGSA member
HILCO 100 West 4th Street Elmira, NY 14901 Phone: (607) 733-7121 Fax: (607) 735-0946 http://www.hilliardcorp.com Key Personnel: Robert Doud, Marketing Manager Mark Stantz, Regional Sales Manager Mark Rose, Marketing Operations Manager Bill Cantando, Regional Sales Manager Description: The Hilliard Corporation manufactures industrial filtration systems, engine starting equipment and oil mist eliminators for the Power Generation Industry. Sells: Emission Control Equipment Engine Starters/Starting Aids Filters, Lube Oil, Fuel or Air Rents: Filters, Lube Oil, Fuel or Air Services: Engine Starters/Starting Aids
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Hilco, Catalyst, Silencer, Reciprocating Engine, Valves, Heat Recovery Systems, Regulation, Heat Recovery, Cooling, Emissions Control
DCL Supplies Catalytic Converters, Silencers, Particulate Filters and Heat Recovery
DCL America Inc. 12620 FM 1960 W Ste 4A, Box 560 Houston, TX 77065 http://www.dcl-inc.com Key Personnel: Brendan Filby, General Manager Glen Prisciak, Senior Sales Engineer Description: DCL is active in the design, manufacture and implementation of advanced emission control systems for stationary and mobile internal combustion engines. DCL's product offering includes catalytic converters, catalytic mufflers, diesel particulate filters as well as heat recovery and siloxane cleanup solutions. Sells: Emission Control Equipment Heat Recovery Systems Silencers/Exhaust Systems/Noise Abatement Services: Emission Control Equipment
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, DCL, Inc., Catalyst, Silencer, Reciprocating Engine, Valves, Heat Recovery Systems, Regulation, Cooling, Emissions Control, Heat Recovery
Cummins has 1500 Fleetguard Air Filter Designs for Engines
Plugged air filters reduce engine performance, create higher fuel consumption, increase exhaust fumes and are harmful to the environment. To properly perform its function of reducing wear and extending engine life, the air filter must filter 100% of the pre-combustion air and remove as much contaminant of any and every particle size as it can to a very high final efficiency. With a range of over 1,500 different air filtration products from clamps to air housings to “state-of-the-art” air filters, Fleetguard Heavy Duty Air Filtration, covers all the needs for air intake systems. Fleetguard Visibowl™ Pre-Cleaners and highly efficient Fleetguard pre-cleaner ™ self cleaning Pre-cleaners are strongly recommended for construction, mining, farming, forestry and other segments where operating conditions are severe.
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, Cummins, Reciprocating Engine
Wartsila Gas Engine Emission Reduciton
EMISSIONS REDUCTION FOR GAS POWER PLANTS Sulphur dioxide (SO2 ) and particulate matter (PM) emissions are insignificant for power plants running on natural gas. Nitrogen oxide (NOX ) emissions are also low. DRY METHODS (PRIMARY) Wärtsilä gas engines use a lean-burn combustion process. In this process, natural gas and air are premixed in a low air/fuel ratio (lambda 2-2.5) before being fed into the cylinders. The lean-burn process efficiently reduces NOX emissions due to a lower combustion temperature. Another advantage with the lean-burn process is the increased output and efficiency of the engine. Wärtsilä gas engines have sufficiently low NOX emissions to comply with most national/local regulations using lean-burn primary method only. SELECTIVE CATALYTIC REDUCTION (SCR) In areas with more stringent control of NOX emissions the engines can be equipped with SCR units. In the SCR, NOX is reduced by a catalyst, combined with a reagent that is either an aqueous solution of urea or ammonia. OXIDATION CATALYSTS Gas (SG) engines and multi-fuel (DF) engines can be equipped with oxidation catalysts for the abatement of carbon monoxide (CO) and/or hydrocarbon (HC) emissions, if required by national regulations. WÄRTSILÄ IOXI The Wärtsilä IOXI (Integrated Oxidation Catalyst) is a compact, cost efficient solution for moderate CO and formaldehyde (CH2 O) reduction from gas engines. Gas engines equipped with IOXI ensure compliance with most stack emission limits. COMBINED SCR AND OXIDATION CATALYST In some areas efficient multi-component emissions reduction is required. The combined catalyst system comprises SCR for NOX emissions and oxidation catalyst for CO and/or HC emission.
Revision Date: 7/30/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, Wartsila, Valves, Silencer, Heat Recovery Systems, Catalyst, Reciprocating Engine, Regulation, Cooling, Heat Recovery, Emissions Control
AMOT Valves, Controls, and Heat Recovery
AMOT 8824 Fallbrook Dr Houston, TX 77064 Phone: (832) 291-5903 Fax: (713) 559-9419 http://www.amot.com Key Personnel: Brant Stewart, Sales Manager Description: AMOT works with original equipment manufacturers and oil and gas companies to design and develop safety products and solutions for engines, compressors, turbines, and other rotating equipment. Our product families include valves, electric and pneumatic instrumentation and control/condition monitoring systems. Sells: Control/Annunciator Systems Heat Recovery Systems Instruments and controls, including meters, gauges, relays, contactors, or switches
Revision Date: 7/29/2016
Tags: 221112 - Fossil Fuel 化石燃料, AMOT, Control System, Heat Recovery Systems, Valve Options
American Cooling Systems Fans for Diesel and Gas Engines
American Cooling Systems, LLC 3099 Wilson Drive N. W. Grand Rapids, MI 49534 Phone: (248) 762-1399 Fax: (800) 605-5451 http://www.americancooling.com Key Personnel: David Solomon, Sales & Marketing Director Description: American Cooling Systems is a manufacturer of polymer cooling fans designed for diesel and gas engine applications. Fan diameters range from 330 mm to 1250 mm. ACS fans are customizable and can be made with pilots up to 254 mm. Call us to discuss your applications requirements, and how we can help optimize your engine cooling. Sells: Radiator/Heat Exchangers
Revision Date: 7/29/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, American Cooling Systems, Catalyst, Silencer, Valves, Heat Recovery Systems, Reciprocating Engine, Regulation, Emissions Control, Cooling
AMPCO Exhaust Stacks Silencers and Exhaust Systems –EGSA Member
AMPCO EXHAUST STACKS 5030 Corporate Exchange Blvd Grand Rapids, MI 49512 http://www.ampcostacks.com Key Personnel: Keith Page, Product Manager Bob Russell, National Sales Manager Rich Sinistore, OEM Sales Manager Mark Walraven, Vice President of Sales Description: For over 20 years, AMPCO has been a manufacturer of , multi-use, pressure stack chimney exhaust systems. AMPCO product installations and applications include boilers, generators, commercial kitchen grease duct, laboratory fume hoods and many more applications. All AMPCO products are UL tested and listed to t stringent safety standards. Sells: Silencers/Exhaust Systems/Noise Abatement
Revision Date: 7/29/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, AMPCO Exhaust Stacks, Valves, Reciprocating Engine, Silencer, Catalyst, Emissions, Regulation, Cooling, Heat Recovery
API Heat Transfer Suppliers Heat Transfer Solutions Worldwide
API Heat Transfer 4700 Ironwood Drive Franklin, WI 53132 Phone: (414) 761-4500 Fax: (414) 761-4510 http://www.apiheattransfer.com Branches in: Air-Cooled Group: Franklin, WI, Arcade NY, Montgomery AL, Coventry UK, Suzhou CHINA. Shell & Tube Group: Buffalo NY, Bretten GERMANY, Pune INDIA, Coventry UK Plate & Thermal Systems Group: Buffalo NY, Bretten GERMANY, Suzhou CHINA Key Personnel: Pete Syftestad, Senior Account Manager Bob Mladenovic, Area Sales Manager Description: API Heat Transfer Inc. is a global leader in the design and manufacture of a wide range of specialty heat exchangers and heat transfer solutions, with 13 modern manufacturing facilities, including locations in the U.S., U.K., China, India, and Germany, and a network of worldwide sales offices for local support. Sells: Radiator/Heat Exchangers Services: Radiator/Heat Exchangers
Revision Date: 7/29/2016
Tags: 221112 - Fossil Fuel 化石燃料, 483111 - Deep Sea Freight Transportation , 211111 - Crude Petroleum and Natural Gas Extraction 原油和天然气开采, API Heat Transfer, Heat Recovery Systems, Catalyst, Silencer, Reciprocating Engine, Valves, Regulation, Emissions Control, Heat Recovery, Cooling
Sulzer SCR Mixing and Other Mixing Equipment
Sulzer has a range of flow control and treatment products including a mixer which evenly distributes ammonia in the ductwork prior to an SCR.
Revision Date: 8/17/2015
Tags: 221112 - Fossil Fuel 化石燃料, Sulzer Ltd., Mixer, SCR, Ammonia Injection, Nox Control
Ion Exchange Resins – Purified water for the world
This presentation provides an overview of LanXess’s Ion Exchange Business Unit and includes a discussion of the drivers for market growth including water scarcity, Asian growth and new nuclear power facilities.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, Lanxess, Ion Exchange, Market, Cost, Ultrapure Water, Water Treatment
Make-Up Water Treatment by Service Contract
The basis for this brochure is an article written in 1997 describing the development of mobile water treatment units beginning in the 1960s. The brochure includes a number of emergency and longer term applications for mobile treatment units for boiler feedwater make-up and process steam make-up.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, GE, Mobile Equipment, Ultrapure Water, Boiler Feedwater Treatment
Degasification with Liqui-Cel® Membrane Contactors
This paper describes Membrana’s Liqui-Cell membrane contactor. Locating a Liqui-Cell unit after reverse osmosis units can extend the life of ion exchange beds and enhance electrodeionization (EDI) performance.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, Membrana, Membrane Filter, Ultrapure Water, Degasification
Ion Exchange and Reverse Osmosis
The water treatment plant at a coal and biomass-fired power plant in the Netherlands was 35 years old and needed to be replaced. Ovivo provided an ion exchange and reverse osmosis system which upgraded the boiler feedwater quality to the new standards without replacing the condensate polishing plant.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, Ovivo Water, Reverse Osmosis, Ion Exchange, Ultrapure Water, Water Treatment, Netherlands
Tutorial on Steam Turbine Drivers for Fossil and Nuclear Feed Pump Applications
This paper presents an overview of the operation and design of steam turbines used for driving reactor and boiler feed pumps.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, 221113 - Nuclear Electric Power Generation * , Siemens, Steam Turbine, Boiler Feedwater Pump, Boiler Feedwater Treatment
ACS 1000 variable speed drives improve efficiency of CHP power plant
The boiler feed-water pumps at Helsinki Energy‘s CHP plant were controlled by wound-rotor motors with slip recovery control system. In order to reduce maintenance costs and further improve the plant‘s efficiency, the pump drive systems were upgraded with four ACS 1000 variable speed drive systems from ABB (each rated at 4500 kW).
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, ABB, Variable Frequency Drive, Boiler Feedwater Pump, Efficiency, Boiler Feedwater Treatment, Finland
EPRI’s Guideline on Chemistry for Fossil Units with Air-cooled Condensers (ACCs)
This paper provides the results of the first worldwide survey of a number of fossil and combined cycle/HRSG plants with air-cooled condensers (ACCs). It includes documentation of the surface condition of the duct surfaces, defining serious corrosion/flow accelerated corrosion regions and guidelines for operating plants with ACCs.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, Structural Integrity Associates, Xcel Energy, EPRI, Air Cooled Condenser, Cycle Chemistry, Corrosion, Dry Cooling
Introduciton to Electrodeionization
This presentation describes eletrodeionization as a chemical-free alternative to mixed bed deionization.
Revision Date: 9/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, Aquatech, Agape Water Solutions, Electrodeionization, Ultrapure Water
MHI and Shenyang Pump Co., Ltd. (SPC) have agreed to establish a joint venture company (JV) in Shenyang, Liaoning Province, China to conduct sales and engineering relating to pumps. The agreement was signed on March 23, 2006, in Shenyang. With establishment of the JV, MHI aims to make a full-scale entrance into the Chinese pump market, where demand for pumps of all kinds is expected to increase vigorously.
Revision Date: 8/19/2014
Tags: 221112 - Fossil Fuel 化石燃料, Mitsubishi Heavy Industries, Sheyang Pump, Boiler Feedwater Pump, Flow Control, Boiler Feedwater Treatment, China
MHI supplies ring section boiler feedwater pumps for combined cycle operation
MHI supplies a variety of pumps for combined cycle and coal fired power plants. Several boiler feedwater designs are available depending on pressures and other parameters. The ring section type is used in combined cycle.
Revision Date: 8/19/2014
Tags: 221112 - Fossil Fuel 化石燃料, Mitsubishi Heavy Industries, Boiler Feedwater Pump, Flow Control, Boiler Feedwater Treatment, China
The Sandardized Sulzer Pumps MD Range Meets CCGT Boiler Feed Requirements
Although most once-through HRSGs are sub-critical, their BFPs have to provide very high pressure. In order to increase pressure, BFPs have more stages and shafts with higher torque capacity than conventional pumps. The Sulzer MD range meets these requirements.
Revision Date: 8/19/2014
Tags: 221112 - Fossil Fuel 化石燃料, Sulzer Ltd., Boiler Feedwater Pump, Boiler Feedwater Treatment
Mitsubhishi and BHEL team up to provide power plant pumps in India
Bharat Heavy Electricals Ltd, India’s biggest power equipment supplier, signed an agreement with Mitsubishi Heavy Industries Ltd in 2007 under which the Japanese firm will license technologies relating to pumps used in thermal power plants.
Revision Date: 8/19/2014
Tags: 221112 - Fossil Fuel 化石燃料, Mitsubishi Heavy Industries, Bharat Heavy Electricals (BHEL), Pump, Flow Control, India
VFDs can make a big difference in optimizing pump energy consumption in cooling tower makeup
William Livoti writing in “Empowering Pumps" discusses some of the potential regulations which will force recycling of cooling water. He says that power plants need to assess their pump requirements and consider variable speed drives to reduce energy consumption. He cites the advantages when handling off peak loads. A specific example is given for the VFD saving with cooling water makeup pumps
Revision Date: 8/18/2014
Tags: 221112 - Fossil Fuel 化石燃料, WEG, Cooling Tower, Variable Frequency Drive, Pump, Energy Efficiency, Regulation, Once Through Cooling, Flow Control, Empowering Pumps
Hach Supplies Instruments to Measure Boiler Feedwater Quality
The performance of the degasification and demineralization system is dependent on accurate measurement of oxygen and other parameters. Hach supplies a variety of instruments to accurately measure the important parameters
Revision Date: 8/18/2014
Tags: 221112 - Fossil Fuel 化石燃料, Hach, Degasification, Boiler Feedwater Monitoring System, Demineralizer, Schematic, Monitoring, Degasification, Boiler Feedwater Treatment, Demineralization
Grundfos has Pumps for Steam Boilers and District Heating
Grundfos supplies the high pressure multi stage pumps for steam boilers. It is a leader in pumps for district heating. Gas turbine combined cycle plants are often replacing coal plants in district heating systems. At the same time the distribution systems are being upgraded with new pumps
Revision Date: 8/8/2014
Tags: 221112 - Fossil Fuel 化石燃料, Grundfos A/S, McIlvaine, Boiler Feedwater Pump, Pump, Combined Heat & Power
GEA is a Major Supplier of Crossflow and Counterflow Cooling Towers
GEA is a major supplier of crossflow and counterflow cooling towers. Various materials from wood to fiberglass can be provided.
Revision Date: 6/4/2014
Tags: 221112 - Fossil Fuel 化石燃料, GEA Group, Cooling Tower, Combined Cycle Journal
Costs of gas turbines compared to other options by DOE in 2013
Excerpt from "Updated Capital Cost Estimates for Utility Scale Electricity Generating Plants" issued by U.S. Energy Information Administration in April 2013.
Revision Date: 12/16/2013
Tags: 221112 - Fossil Fuel 化石燃料, 221113 - Nuclear Electric Power Generation * , 221118 - Other Electric Power , 221111 - Hydroelectric Power Generation 水力发电, Cost